Environmental Test Chamber With Programmable

Environmental Test Chamber With Progammable

ds.png

Minimum           1 SET
Delivery             15 days after order.
Country              China
BrandName       HD
Package              Each set protected with resin fiber and PP film, then put into
                                 Strong  wooden case with operation manual and video inside.

Product description:

Programmable Environmental Test Chamber can simulate the natural environment ,such as -70℃–150℃ temperature range environment,and 20%–98% humidity environment.so this test chamber can do temperature test,humidity test and other environmental test in the programmable operating system.the key point of the environmental chamber be equipped with the tempered glass observation window,safety protection device,LCD touch screen controller.To ensure fast and efficient environment testing for the operator.

Aplication Industry

  1. Electronic products: mobile phones, computers, television, video recorders
  2. Textile fabric products: clothes, hats, shoes, ropes
  3. Wire and cable: data cable, usb,
  4. Leather products: handbags, wallets, leather shoes, leather chairs
  5. Instrumentation, vehicles, plastic products, metal,
  6. Food, chemical, building materials, medical, aerospace
  7. Others

 

Application Function

1. To simulate test environment with different temperature and humidity

2. Cyclic test includes climatic conditions: holding test,cooling-off test,heating-up test, moistening test and drying test,colding test,hotting test.

3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

4. Uncover test unit weakness in a short-term test with accelerated time effect

 

Compatible test standards:

IEC60068-2-1 : Cold

IEC60068-2-2 : Dry heat

IEC60068-2-14 : Change of temperature with specified rate of change

IEC60068-30 : Damper heat, cyclic (Rapid-Rate Temperature Cycle Type)

IEC60068-2-38 : Composite temperature/ humidity cyclic test

IEC60068-2-78 : Damp heat, steady state

IEC61747(5.2.7) : Liquid crystal and solid-state display devices Environmental, endurance and mechanical test (Rapid-Rate Temperature Cycle Type)

ISO16750-4 5.3 : Road vehicles (temperature cycling)

Chamber Parameter:

Model HD-E702-100-7 (100L,150L,225L,408L,800L can be optional)
Internal dimension (W*D*H) 400*500*500mm(can optional different sizes)
External dimension (W*D*H) 900*1070*1400mm(can optional different sizes)
Temperature range -70~+150℃
Temperature fluctuation ±0.5℃
Temperature uniformity 2℃
Humidity range 20~98%RH (Refer Image below)
Humidity fluctuation ±2.5%RH
Humidity uniformity 3%RH
Cooling speed 1℃/min in average (without loading)
Heating speed 3℃/min in average (without loading)
Internal chamber material SUS#304 stainless steel, mirror finished
External chamber material Stainless steel
Cooling method Air cooling
Controller LCD touch screen, programmable control temperature and humidity

Can set different parameter for cyclic test
Insulation material 50mm high density rigid Polyurethane foam
Heater Explosion-proof type SUS#304 stainless steel fins radiator pipe heater
Compressor France Tecumseh compressor x 2sets
Lighting Heat resistance
Temperature sensor PT-100 dry and wet bulb sensor
Observation window Tempered glass
Testing hole Diameter 50mm, for cable routing
Sample tray SUS#304 stainless steel, 2pcs

 

Jika Anda membutuhkan alat pengujian silahkan hubungi kami disini : 

  • Addres : Jl.Radin Inten II No.62, Duren Sawit, Jakarta Timur
  • E-mail : sales@alatuji.com
  • Phone : 021 8690 6777
  • Fax : 021 8690 6770