Rapidly Climatic Test Chamber
Climatic test chamber can simulate test environment with different temperature and humidity by 2 set compressors, meet with international standards ISO,CE,ASTM,JIS,GB,CNS…2 compressors increase the operating efficiency of the climate chamber and reduce the cooling time.
- France Tecumseh compressor x 2sets
- programmable control temperature and humidity
- Internal dimension (W*D*H)—— 1000*800*1000mm
- External dimension (W*D*H)—— 1500*1180*1900mm
- High performance and quiet operation (68 dBA)
- Space-saving designed for flush installation to wall
Safety Protection Device:
- Protection for leakage
- Over-temperature
- Compressor overvoltage and overload
- Heater short circuit
- Water shortage
Applications:
- To simulate test environment with different temperature and humidity
- Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
- Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
- Uncover test unit weakness in a short-term test with accelerated time effect
Standard Features:
Internal dimension (W*D*H)—— 1000*800*1000mm
External dimension (W*D*H)—— 1500*1180*1900mm
Temperature range—— -70~+150℃
Temperature fluctuation—— ±0.5℃
Temperature uniformity—— 2℃
Humidity range—— 20~98%RH (Refer Image below)
Humidity fluctuation—— ±2.5%RH
Humidity uniformity—— 3%RH
Cooling speed—— 1℃/min in average (without loading)
Heating speed—— 3℃/min in average (without loading)
Internal chamber material—— SUS#304 stainless steel, mirror finished
External chamber material—— Stainless steel
Cooling method—— Air cooling
Controller—— LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic test
Insulation material—— 50mm high density rigid Polyurethane foam
Heater—— Explosion-proof type SUS#304 stainless steel fins radiator pipe heater
Compressor—— France Tecumseh compressor x 2sets
Lighting—— Heat resistance
Temperature sensor—— PT-100 dry and wet bulb sensor
Observation window—— Tempered glass
Testing hole—— Diameter 50mm, for cable routing
Sample tray—— SUS#304 stainless steel, 2pcs
Safety protection device—— Protection for leakage
Chamber Design Features:
- High performance and quiet operation (68 dBA)
- Space-saving designed for flush installation to wall
- Full thermal break around doorframe
- One 50mm diameter cable port o left, with flexible silicone plug
- Accurate wet/dry-bulb humidity measurement system for easy maintain
Programmable Controller:
LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic test
- PLC controller for test chamber
- Step types include: ramp, soak, jump, auto-start, and end
- RS-232 interface to connect computer for output
Jika Anda membutuhkan alat pengujian silahkan hubungi kami disini :
- Addres : Jl.Radin Inten II No.62, Duren Sawit, Jakarta Timur
- E-mail : sales@alatuji.com
- Phone : 021 8690 6777
- Fax : 021 8690 6770
- Website : http://www.alatuji.com