Salt Spray Chamber Description:
Salt spray test is an international certification standardization and popular corrosion test method for checking the corrosion resistance of materials and surface coatings.
HAIDA salt spray chamber is the inexpensive, fastest, standard and repeatable ,mainly used to detect salt spray corrosion resistance of the material or material surface coating which often in corrosive environment . The HD salt spray chamber is equipped with an intelligent salt spray test system that enables quick and standardized conversion of test modules. Automatically adjust the test temperature in the workpeace (Salt Spray Method (NSS ACSS) 35 ± 1 ° C, Corrosion-resistant Testing Method (CASS) 50 ± 1 ° C).
Applicable Standards:
- ASTM B117, ASTM G85, ASTM D1141-98
- DIN EN ISO 9227 (NSS, ESS, CASS)
- DIN 50942, DIN 53 167
- ASTM B 117-73, ASTM B 287-74, ASTM B 368-68
- DIN EN 60068-2-11
- BS 1224, BS 2011, BS3900 F4, BS 3900 F12, BS 5466 Part 1, BS 5466 Parts 2+3
- NFX 41002
- AS 21331 Section 3.1
- SIS 1841190
- JIS Z 2371
Application Industry:
Salt spray chamber is mainly artificial simulation of corrosion standard environment, used to test long-term corrosive environment in the material or surface coating corrosion resistance.Salt spray test chamber widely used in hardware, electroplating, electronics, chemicals, automotive, aviation, coatings, wire and cable, circuit boards, communications and other industries.
Salt spray chambers features:
- Provides USB Host for USB flash drive
- Touch-screen operator control interface.
- Easy Open’ pneumatically operated canopy.
- Dry seal gasket prevents wetting operator’s clothes, etc.
- Low loading threshold for loading and unloading.
- Large capacity floor standing salt solution reservoir.
- Calibration certificate.
- Canopy color choice.
- Set of sample racks.
Experimental space volume:
60L/90L/120L/160L/800L (can be customized)
Salt spray chambers Specification:
Model | HD-E808-90 |
Internal Size (L×W×H) | 900x600x500mm |
External Size (L×W×H) | 1410x880x1280mm |
Equipment Material | Both inside & outside shell adopt P.V.C rigid plastic board |
Temperature Range | Room temperature ~ 55℃ |
Temperature Fluctuations | ≤±0.5℃ |
Temperature Uniformity | ≤±2℃ |
Temperature Precision | ±1℃ |
Spraying method | Continuous and Periodic spray type |
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1℃ Corrosion-resistant Testing Method (CASS) 50±1℃ |
Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1℃ Corrosion-resistant Testing Method (CASS) 63±1℃ |
Brine Temperature | 35℃±1℃ |
Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
PH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method(CASS)3.0~3.2 |
Lab Volume | 270L |
Brine Tank Capacity | 25L |
Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
Accessories | Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
Air source | 1HP Air pump (provided by buyer) |
Jika Anda membutuhkan alat pengujian silahkan hubungi kami disini :
- Addres : Jl.Radin Inten II No.62, Duren Sawit, Jakarta Timur
- E-mail : sales@alatuji.com
- Phone : 021 8690 6777
- Fax : 021 8690 6770