Salt Spray Test Chamber

Salt Spray Test Chamber
Salt Spray Test Chamber.jpg
Minimum             1 SET
Delivery                15 days after order.
Model                    HD-E808
Country                 China
BrandName          HD
Package                 Each set protected with resin fiber and PP film, then put into
                                     Strong wooden case with operation manual and video inside.

Product Description:

Salt Spray Test Chamber adapted to the surface treatment of various materials ,  including paint ,  electroplating ,  organic and inorganic coating ,  anode processing ,  antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.

The table parameters is for the company Standard Model parameters, we support customer customization parameters

Product Features：

  • Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
  • Reservoirs with mixing system on stand.
  • Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
  • Exposure zone lined with corrosion-resistant PVC sheets.
  • Clear cover allows viewing of test conditions.
  • Peaked cover prevents dripping of condensation onto samples.
  • Water seal and water level protection system.
  • Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
  • Automatic DI water fills to humidifying tower.
  •  Digital temperature control.
  •  Integral over-protection on heaters.
  •  Low water cut-off protection on humidifying tower.

Standard Parameters：

Model HD-E808
Internal Size (L×W×H) 900x600x500mm
External Size (L×W×H) 1410x880x1280mm
Equipment Material Both inside & outside shell adopt P.V.C rigid plastic board
Temperature Range Room temperature ~ 55℃
Temperature Fluctuations ≤±0.5℃
Temperature Uniformity ≤±2℃
Temperature Precision ±1℃
Spraying method Continuous and Periodic spray type
Test Chamber Temperature Salt Spray Method (NSS ACSS)35±1℃
Corrosion-resistant Testing Method (CASS) 50±1℃
Saturated air Barrel Temperature Salt Spray Method (NSS ACSS)47±1℃
Corrosion-resistant Testing Method (CASS) 63±1℃
Brine Temperature 35℃±1℃
Spray Quantity 1.0~2.0 ml / 80cm2 / hr
PH value Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
Lab Volume 270L
Brine Tank Capacity 25L
Multiple Safety Protection Devices Current discharge protection, over pressure protection, over temperature protection, over load fuse protection
Accessories Testing Salt/ Measuring tank/Nozzle Equipment x 1 set
Air source 1HP Air pump (provided by buyer)

Jika Anda membutuhkan alat pengujian silahkan hubungi kami disini : 

  • Addres : Jl.Radin Inten II No.62, Duren Sawit, Jakarta Timur
  • E-mail : sales@alatuji.com
  • Phone : 021 8690 6777
  • Fax : 021 8690 6770